[APACHE DOCUMENTATION]

Apache HTTP Server

Compiling Apache for Microsoft Windows

There are many important points before you begin compiling Apache. See Using Apache with Microsoft Windows before you begin.

Compiling Apache requires Microsoft Visual C++ 5.0 or 6.0 to be properly installed. It can be built with command-line tools, or within the Visual Studio environment. Consult the VC++ manual to determine how to install them. Be especially aware that the vcvars32.bat file from the Program Files/DevStudio/VC/bin folder, and the setenv.bat file from the Platform SDK, may be required to prepare the command-line tools for command-line builds (e.g. using nmake). To install apache with the Makefile.win or the InstallBin project in the Visual Studio IDE, the awk utility is also required.

First, you should install awk.exe where it can be found in the path and the DevStudio environment, if you plan to use the IDE. There are many versions of awk available for Windows; the easiest to install is available from Brian Kernighan's http://cm.bell-labs.com/cm/cs/who/bwk/ site. When downloading http://cm.bell-labs.com/cm/cs/who/bwk/awk95.exe from this site, you must save it with the name awk.exe rather than awk95.exe.

Note that DevStudio will only find awk.exe if its location is listed under the Tools menu Options... Directories settings for the Executable files. Add the path for awk.exe to this list, as needed.

Then unpack the Apache distribution into an appropriate directory. Open a command-line prompt, and change to the src subdirectory of the Apache distribution.

The master Apache makefile instructions are contained in the Makefile.win file. To compile Apache on Windows NT, simply use one of the following commands:

These will both compile Apache. The latter will include debugging information in the resulting files, making it easier to find bugs and track down problems.

If you get an error such as "the name specified is not recognized..." then you need to run vcvars32.bat first. Enter the following command;

  "c:\Program Files\DevStudio\VC\Bin\VCVARS32.BAT"

(you will need to adjust this command so it matches the directory where your VC was installed.)

If you are a Visual C++ 5.0 user, and have installed a recent Platform SDK, you may also need to enter the following command (adjusted for the install directory of the Platform SDK update);

  "c:\Program Files\Platform SDK\SETENV.BAT"

Then try the nmake command again.

Note that the Windows Platform SDK update is required to enable all supported mod_isapi features. The SDK files distributed with Microsoft Visual C++ 5.0 are out of date. Without a recent update, Apache will issue warnings under MSVC++ 5.0 that some mod_isapi features will be disabled. Look for the update at http://msdn.microsoft.com/downloads/sdks/platform/platform.asp.

Apache can also be compiled using VC++'s Visual Studio development environment. To simplify this process, a Visual Studio workspace, Apache.dsw, is provided in the src folder. This workspace exposes the entire list of working .dsp projects that are required for the complete Apache binary release. It includes dependencies between the projects to assure that they are built in the appropriate order. InstallBin is the top-level project that will build all other projects, and install the compiled files into their proper locations.

These .dsp project files are distributed in Visual C++ 6.0 format. Visual C++ 5.0 (97) will recognize them with the single exception of the /ZI flag, which corresponds to the VC 5.0 /Zi flag for debugging symbols. To quickly prepare the .dsp files for the Visual Studio 5.0 (97), you can use the perl scripts distributed in the src\helpers folder:

  cd src\helpers
  cvstodsp5.pl

This command assumes you have a Perl interpreter installed and registered for files of type .pl. The list of converted .dsp project files will be displayed as they are converted. If you contribute back a patch that offers revised project files, please convert them back with the script dsp5tocvs.pl, which puts the projects back to Visual Studio 6.0 format.

The core .dsp projects built by Apache.dsw and makefile.win are:

  1. os\win32\ApacheOS.dsp
  2. os\win32\Win9xConHook.dsp
  3. regex\regex.dsp
  4. ap\ap.dsp
  5. lib\expat-lite\xmltok.dsp
  6. lib\expat-lite\xmlparse.dsp requires xmltok
  7. lib\sdbm.dsp
  8. main\gen_uri_delims.dsp
  9. main\gen_test_char.dsp
  10. ApacheCore.dsp requires all of the above
  11. Apache.dsp requires ApacheCore

In addition, the os\win32 subdirectory contains project files for the optional modules, all of which require ApacheCore.

  1. os\win32\mod_auth_anon.dsp
  2. os\win32\mod_auth_dbm.dsp also requires sdbm
  3. os\win32\mod_auth_digest.dsp
  4. os\win32\mod_cern_meta.dsp
  5. os\win32\mod_digest.dsp
  6. os\win32\mod_expires.dsp
  7. os\win32\mod_headers.dsp
  8. os\win32\mod_info.dsp
  9. os\win32\mod_rewrite.dsp
  10. os\win32\mod_speling.dsp
  11. os\win32\mod_status.dsp
  12. os\win32\mod_usertrack.dsp
  13. os\win32\mod_proxy.dsp

The support\ folder contains project files for additional programs that are not part of the Apache runtime, but are used by the administrator to maintain password and log files.

  1. support\htdigest.dsp
  2. support\htpasswd.dsp
  3. support\logresolve.dsp
  4. support\rotatelogs.dsp

Once Apache has been compiled, it needs to be installed in its server root directory. The default is the \Apache directory, on the current hard drive.

To install the files into the c:\ServerRoot directory automatically, use one the following nmake commands (see above):

The c:\ServerRoot argument to INSTDIR gives the installation directory (it can be omitted if Apache is to be installed into \Apache).

This will install the following:

If you do not have nmake, or wish to install in a different directory, be sure to use a similar naming scheme.

To simplify the process, dependencies between all projects are defined in the Microsoft Visual Studio workspace file: 

   src/Apache.dsw

This assures that lower-level sources are rebuilt from within Visual Studio. The top level project is InstallBin, which invokes Makefile.win to move the compiled executables and dlls. You may personalize the INSTDIR= setting by changing the Settings for InstallBin, Build command line entry under the General tab. The default from within the InstallBin.dsp project is one level up (..) from the src tree. Modify the InstallBin settings and edit the INSTDIR=.. entry to the desired target directory.

Apache HTTP Server

Index